FAQ mouseCLOCK Reception Position - Versionsgeschichte

Lh am 10. Dezember 2024 um 13:17 Uhr

2024-12-10T13:17:06Z

Ps am 5. Dezember 2019 um 14:22 Uhr

2019-12-05T14:22:43Z

Ps: Die Seite wurde neu angelegt: „=How do I get to a good reception position?= ==LED flashing behaviour== * The LED of the Expert mouseCLOCK should flash red/green very regularly once per seco…“

2019-12-05T14:22:06Z

Die Seite wurde neu angelegt: „=How do I get to a good reception position?= ==LED flashing behaviour== * The LED of the Expert mouseCLOCK should flash red/green very regularly once per seco…“

Neue Seite

=How do I get to a good reception position?=

==LED flashing behaviour==
* The LED of the Expert mouseCLOCK should flash red/green very regularly once per second. Only when you are able to stabilize this situation will you be able to receive a DCF time after some time.

==Horizontal Alignment==
* Try to create the reception situation described above by turning the Expert mouseCLOCK and letting it point in a different direction. The DCF77 radio waves should ideally hit the wide side of the Expert mouseCLOCK.

[[Datei:dcf77_ausrichtung.gif]]

==Interference Sources==
* When positioning, try to keep the greatest possible distance to possible sources of interference (e.g. '''monitors''' with a line repetition frequency of 77kHz, '''motors''', '''printers''','''copiers''').
* Even '''metal bodies''' (e.g. '''steel beams''', '''pipes''' etc.) reflect and shield radio waves and can thus also attenuate or interfere with the signal.

However, positioning close to the window often proves successful.

'''Hinweis:'''
If you have found a good position, the software must have at least two full minutes of undisturbed reception in order to detect a correct DCF time. This results from the fact that the time information of the DCF signal is coded over a complete minute and WinClk must always receive two matching minutes to accept this time as valid for security reasons.
(see FAQ: [[FAQ mouse Clock Synchronisationsfrequenz|Wie oft wird die Zeit synchronisiert?]])

@@ Zeile 2: / Zeile 2: @@
 ==LED flashing behaviour==
-* The LED of the Expert mouseCLOCK should flash red/green very regularly once per second. Only when you are able to stabilize this situation will you be able to receive a DCF time after some time.
+* The LED of the EMC Professional should flash red/green very regularly once per second. Only when you are able to stabilize this situation will you be able to receive a DCF77 time after some time.
 ==Horizontal Alignment==
-* Try to create the reception situation described above by turning the Expert mouseCLOCK and letting it point in a different direction. The DCF77 radio waves should ideally hit the wide side of the Expert mouseCLOCK.
+* Try to create the reception situation described above by turning the EMC Professional and letting it point in a different direction. The DCF77 radio waves should ideally hit the wide side of the rod antenna.
-[[Datei:dcf77_ausrichtung.gif]]
+[[Datei:Frankfurt..png]]
@@ Zeile 17: / Zeile 17: @@
 '''Note:'''
-If you have found a good position, the software must have at least two full minutes of undisturbed reception in order to detect a correct DCF time. This results from the fact that the time information of the DCF signal is coded over a complete minute and WinClk must always receive two matching minutes to accept this time as valid for security reasons.
+If you have found a good position, the software must have at least two full minutes of undisturbed reception in order to detect a correct DCF77 time. This results from the fact that the time information of the DCF77 signal is coded over a complete minute and must always receive two matching minutes to accept this time as valid for security reasons.
 (see FAQ: [[FAQ mouse Clock Synchronisationsfrequenz|Wie oft wird die Zeit synchronisiert?]])