Nagios: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Mb (Diskussion | Beiträge) |
Mb (Diskussion | Beiträge) |
||
Zeile 28: | Zeile 28: | ||
host_name esb7213-3.gudetest | host_name esb7213-3.gudetest | ||
service_description Hygro1 | service_description Hygro1 | ||
− | check_command check_gudesensor_py!53.0.1!60!70!>!Hygro!% | + | check_command check_gudesensor_py!53.0.1!60!70!>!Hygro!% |
check_interval 1 | check_interval 1 | ||
} | } |
Version vom 21. Januar 2019, 17:56 Uhr
Nagios: check_gude.py (HTTP/JSON)
Download
Test
./check_gude.py -H esb7213-3.gudetest --sensor 53.0.0 --nagios -w 20 -c 30 --label Temp --unit C WARNING: Temp1=24.96C (w: 20, c: 30, op:>) esb7213-3.gudetest | Temp1=24.96C;20;30
Nagios Configuration
- Command
define command { command_name check_gudesensor_py command_line /usr/local/bin/check_gude.py -H '$HOSTADDRESS$' --sensor '$ARG1$' --nagios --warning $ARG2$ --critical $ARG3$ --operator "$ARG4$" --label "$ARG5$" --unit "$ARG6$" }
- Services
define service { use generic-service host_name esb7213-3.gudetest service_description Temp1 check_command check_gudesensor_py!53.0.0!35!40!>!Temp!C check_interval 1 }
define service { use generic-service host_name esb7213-3.gudetest service_description Hygro1 check_command check_gudesensor_py!53.0.1!60!70!>!Hygro!% check_interval 1 }
Nagios: check_gude.pl : netways Nagios Plugin (SNMP)
Download
Test
./check_gude.pl --host 10.113.0.26 --community=public -k Temp1 -w 30 -c 35
Expert Sensor Box 7211-0: WARNING - WARNING: Temp1=30.2C (w:30, c:35) sysDescr: Expert Sensor Box 7211-0 enterprise oid: .1.3.6.1.4.1.28507.31 Temp1 = 302 | Temp1=30.2C;30;35
Nagios Configuration
- Command
define command { command_name check_gudesensor command_line /usr/local/bin/check_gude.pl -H '$HOSTADDRESS$' -k $ARG1$ -w $ARG2$ -c $ARG3$ }
- Services
define service { use generic-service host_name 10.113.0.26 service_description Temp1 check_command check_gudesensor!Temp1!30!35 }
define service { use generic-service host_name 10.113.0.26 service_description Hygro1 check_command check_gudesensor!Hygro1!60!70 }
Nagiosgrapher
Config
define ngraph{ service_name Hygro graph_log_regex Hygro\d+=(\d+\.\d+)% graph_value RTA graph_units % graph_legend humidity rrd_plottype AREA rrd_color 00a000 } define ngraph{ service_name Temp graph_log_regex Temp\d+=(\d+\.\d+)C graph_value RTA graph_units C graph_legend temperature rrd_plottype LINE2 rrd_color a00000 }