Install the firmware update without switching the power ports

Aus Gude Systems GmbH
Zur Navigation springen Zur Suche springen

The EPC can switch back and forth between the bootloader and the firmware without a cold boot by pressing the select and ok buttons simultaneously.

The following is required for this: 

   Bootloader >= v2.2
   EPC firmware >= v2.1.12


Hold both buttons down simultaneously until the status LED flashes. You are now in bootloader mode. After a firmware update, hold both buttons down again until the status LED stops flashing to start the firmware.


This allows you to perform a firmware update without having to switch the power ports.

Abgerufen von „https://wiki.gude-systems.com/index.php?title=Install_the_firmware_update_without_switching_the_power_ports&oldid=1509“