Install the firmware update without switching the power ports

Sprache wählen/
Select language:

• 🇩🇪 DE
• 🇬🇧 EN

The EPC can switch back and forth between the bootloader and the firmware without a cold boot by pressing the select and ok buttons simultaneously.

The following is required for this:

   Bootloader >= v2.2
   EPC firmware >= v2.1.12

Hold both buttons down simultaneously until the status LED flashes. You are now in bootloader mode. After a firmware update, hold both buttons down again until the status LED stops flashing to start the firmware.

This allows you to perform a firmware update without having to switch the power ports.