Version vom 10. September 2014, 15:22 Uhr

@@ Zeile 5: / Zeile 5: @@
 = Expert Power Control NET Rev.2 / Expert Power Control 1000 =
-** [http://www.gude.info/temp/epc_1x_gude_1000_v1.1.4.bin Firmware v1.1.4]
+* [http://www.gude.info/temp/epc_1x_gude_1000_v1.1.4.bin Firmware v1.1.4]
@@ Zeile 17: / Zeile 17: @@
 =Expert Power Control NET 8x=
-*Rev.1
+==Rev.1==
 ** [http://www.gude.info/temp/epc_8x_v1.04_5.bin Firmware v1.04 (5)]
 ** [http://www.gude.info/temp/setup_gblconf_v1.44.exe GBL_Conf v1.44]
-*Rev.2 (EPC 8010)
+==Rev.2 (8010)==
 * [http://www.gude.info/temp/5371__epc_8x_rev2__8012__v2.5.1.bin Firmware v2.5.1]
@@ Zeile 26: / Zeile 26: @@
 =Expert Power Control NET 1x=
 [[Datei:Epciec_rev1_2.jpg|Rev.1]]
-*Rev.1
+==Rev.1==
 ** [http://www.gude.info/temp/epc_single_v1.07_5.bin Firmware v1.07 (5)]
 ** [http://www.gude.info/temp/setup_gblconf_v1.44.exe GBL_Conf.exe v1.44]
-*Rev.2
+==Rev.2==
 ** [http://www.gude.info/temp/epc_1x_gude_1000_v1.1.4.bin Firmware v1.1.5]
 ** [http://www.gude.info/fileadmin/user_upload/Download/setup-gblconf_v2.7.7.exe GBL_Conf.exe v2.x]

Downloads: Unterschied zwischen den Versionen