Upload Config

If you want to configure multiple devices the same way, you can upload a CLI file using the http command curl.

Here, we want to enable NTP Client and one Timer Rule configured in multiple devices identically.

config.txt sets up the configuration, upload.sh is used to upload the config and reboot to apply:

 ./upload.sh config.txt 192.168.0.2
 ./upload.sh config.txt 192.168.0.3
 ./upload.sh config.txt 192.168.0.4

config.txt

# Enable NTP Client
clock ntp server 0 set "0.pool.ntp.org"
clock ntp server 1 set "1.pool.ntp.org"
clock ntp enabled set 1


# Delete all Pre-Configured Timers
timer delete all


# Set Up New Timer:
# Timer1: Mo-Fr from 09:00:00 to 17:00:00 : Port 1 ON

timer 1 name set "Port1 on from 9to5 weekdays" 
timer 1 trigger HOUR set "9"
timer 1 trigger MIN  set "0"
timer 1 trigger SEC  set "0"
timer 1 trigger DAY  set "ALLSET"
timer 1 trigger MON  set "ALLSET"
timer 1 trigger DOW  set "0,1,2,3,4"

timer 1 action mode set SWITCH
timer 1 action SWITCH1 ON  set "1" 
timer 1 action SWITCH2 OFF set "1"
timer 1 action delay set 28800 
timer 1 enabled set 1

# Start Timer engine
timer enabled set ON

upload.sh

#!/bin/bash

# Upload Config File
curl -F file=@./$1 "http://$2/fwupdate.txt?type=2"

# Rebot to apply
curl "http://$2/status.json?cmd=39"

curl

https://curl.haxx.se/download.html