For the configuration and control of the device, there is a set of commands with parameters that can be entered through a console. The console is available via SSH or Telnet, or for devices with RS232 port through using a serial terminal. It is not necessary to use Telnet, in Raw Mode a simple TCP/IP connection is sufficient to send commands. The communication can also be performed automated (e.g. via scripting languages). The console features are configured through the web interface .

Login

A ssh / telnet log in can be configured with password or without:

Command Set

There are several command levels. The following commands are usable from each level:

|- bgcolor="#C1DDFB" |align="left"|back |align="left"|go back one level |- |- bgcolor="#C1DDFB" |align="left"|help |align="left"|all commands of the actual level |- |- bgcolor="#C1DDFB" |align="left"|help all |align="left"|show all commands |- |- bgcolor="#C1DDFB" |align="left"|logout |align="left"|logout (only when login required) |- |- bgcolor="#C1DDFB" |align="left"|quit |align="left"|quit console |- |}

The "help" command returns all the commands of the current level. If "help" is called from the top level, e.g. the line "http [subtopics]" appears. This means that there is another level for "http". With the command "http help" all commands below "http" are shown. Alternatively, with entering "http" you can select the http level, and "help" shows all the commands on the selected level. The command "back" again selects the top level. It is possible to use "help" at any position: "http passwd help" provides all commands that have the prefix "http passwd". You will find a complete list of all possible device commands in the chapter "Cmd Overview".

Parameter

If parameters are expected for the command, the parameter may be passed as numeric or constant. If e.g. you get the following line as help:

http server set {http_both=0|https_only=1|http_only=2}

the following instruction pairs are equivalent:

http server set https_only
http server set 1

or

http server set https_both
http server set 0

Numerical parameters can be entered with different bases. Here is an example of the decimal value 11:

|- bgcolor="#C1DDFB" |align="left"|decimal (10) |align="left"|11 |- |- bgcolor="#C1DDFB" |align="left"|hexadecimal (16) |align="left"|0xb |- |- bgcolor="#C1DDFB" |align="left"|octal (8) |align="left"|013 |- |- bgcolor="#C1DDFB" |align="left"|binary (2) |align="left"|0b1011 |- |}

Bit Field Parameter

Some parameters can take several values at the same time. In the following example, all values between 0 and 5 can be set. In the help, this can be recognized by the fact that the values are not separated by the "|" character, but by commas.

"{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2,EVT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER=5}"

To set EVT_SYSLOG and EVT_EMAIL in a command, you can use the following syntax:

>extsensor 1 2 0 events type set "EVT_SYSLOG,EVT_EMAIL"
OK.

or numeric

>extsensor 1 2 0 events type set "0,2"
OK.

Additionally you can set all values with "ALLSET" or encode any bit pattern as hexadecimal with a syntax like "#7f1a".

Return Values

If a command is unknown or a parameter is incorrect, the output "ERR." is given at the beginning of the line, followed by a description of the fault. Successful instructions without special return value will be acknowledged by "OK.". All other return values are output within a single line. There are of two exceptions:

Some configuration changes, that affect TCP / IP and UDP, need a restart to be applied. These parameters are output on two lines. In the first line the current value is shown, on the second row the value after a restart. In the "Cmd Overview" table this is marked with "Note 2".
Other configurations (such as the assigned IPv6 addresses) have several values that can change dynamically. This is marked with "Note 3" in the "Cmd Overview" table.

Numerical Returns

For parameters that support constants, these constants are output as return values. To better deal with scripting languages, it may be easier to work only with numerical returns. The command "vt100 numeric set ON" enables that only numerical values appear.

Telnet

If the configuration "Raw Mode" is turned off, it is tried to negotiate the Telnet configuration between client and server using IAC commands. If this fails, the editing functions are not active, and the "Activate echo" option determines whether the characters sent to the Telnet server will be returned. Normally the client begins with the IAC negotiation. If this is not the case with the client, the device configuration "Active negotiation" should be turned on.

Raw Mode

If you want to use the console only automated, it may be advantageous to set the configuration "Raw mode" to "yes" and "Activate echo" to "no" to. Then there is no interfering interaction with the editor functions and the is no need to filter the sent characters to process the return values.
If in the console "Raw mode" is activated but not in the used Telnet client, the IAC commands sent at the beginning can appear as interfering characters in the command line (partially invisible).

Editing

The following edit functions are available when the terminal supports VT100, and Raw Mode is deactivated. Entered characters are inserted at the cursor position.

|- bgcolor="#C1DDFB" |align="left"|Keys |align="left"|Function |- |- bgcolor="#C1DDFB" |align="left"|Left, Right |align="left"|moves cursor left or right |- |- bgcolor="#C1DDFB" |align="left"|Pos1, End |align="left"|moves cursor to the beginning or end of line |- |- bgcolor="#C1DDFB" |align="left"|Del |align="left"|deletes character left of cursor |- |- bgcolor="#C1DDFB" |align="left"|Backspace |align="left"|deletes character left of cursor |- |- bgcolor="#C1DDFB" |align="left"|Up, Down |align="left"|shows input lines history |- |- bgcolor="#C1DDFB" |align="left"|Tab, Ctrl-Tab |align="left"|completes the word at cursor |- |- bgcolor="#C1DDFB" |align="left"|Ctrl-C |align="left"|clears the line |- |}
This chapter is general for all Gude devices. Depending on the device type, ports or certain sensors may not be available.

Examples of commands

a) External Sensors

>extsensor all show
E=1,L="7106",0="21.3°C",1="35.1%",3="1013hPa",4="5.2°C",5="16.0°C""
E=2,L="7102",0="21.2°C",1="35.4%",4="5.3°C",5="15.9°C""

The command lists one connected external sensor per line, and the individual measured values are separated by commas after the label name. The digit before the equal sign corresponds to the Index field in the External Sensor Table.

>extsensor 1 0 value show

Displays temperature of the sensor at Port 1

b) Line Sensors

For devices with 230V input metering (Metered PDU).

>linesensor all "0,1,2,3,12" show
L=1,L="Power Port",0="13000Wh",1="0W",2="225V",3="0A",12="998218s"
L=2,L="Power Port",0="13000Wh",1="0W",2="223V",3="0A",12="996199s"

This command outputs all line sensor values in one line. A list of all fields (according to the energy sensor table) is transferred as parameter. In this example these are the fields Absolute Active Energy (0), Power Active (1), Voltage (2), Current (3) and Reset Time (12).

>linesensor 1 <cod>"0,1,2,3,12" show
>linesensor 1 1 show

These variants give the sensor values of the field list or of a sensor at Line-In 1. For devices with Overvoltage Protection, the "linesensor all" command also outputs the state of the protection ("OVP=x"). A "1" means ok, a "0" a failure of the protection.

c) Port Sensors

For devices with 230V output metering (Outlet-Metered PDU).

>portsensor all "0,1,2,3,12" show
P=1,L="Power Port",0="13000Wh",1="0W",2="225V",3="0A",12="998218s"
P=2,L="Power Port",0="13000Wh",1="0W",2="225V",3="0A",12="996199s"
...
P=12,L="Power Port",0="13000Wh",1="0W",2="225V",3="0A",12="998218s"

This command outputs all port sensor values in one line. A list of all fields (according to the energy sensor table) is passed as parameter. In this example these are the fields Absolute Active Energy (0), Power Active (1), Voltage (2), Current (3) and Reset Time (12).

>portsensor 2 "0,1,2,3,12" show
>portsensor 2 1 show

These variants give the sensor values of the field list or a sensor to at Outlet Port 2.
The following examples refer to Gude devices that have switchable ports.

d) Displaying Port Relays

>port all state 1 show
P1=ON,P2=OFF,P3=ON,P4=OFF,P5=OFF,P6=OFF,P7=OFF,P8=ON

The command "port all state {MODE0=0|MODE1=1|MODE2=2} show" returns the switching state of all relays in 3 possible formats.

e) Switching Port Relays

#port all state set "1,2,12" 1
OK.

The command syntax "port all state set "{port_list}" {OFF=0|ON=1}" sets a list of ports to ON=1 or OFF=0.

SSH

The device supports SSH-2 connections with either public key authentication or user name and password. The "login" must be enabled for SSH. Users and passwords can be stored locally or retrieved via a radius server. If you want to use SSH in a terminal, Activate echo should be enabled.

Public Keys

The following public keys are accepted:

|- bgcolor="#C1DDFB" |align="left"|Key type |align="left"|Length |- |- bgcolor="#C1DDFB" |align="left"|RSA |align="left"|2048, 4096 |- |- bgcolor="#C1DDFB" |align="left"|ECDSA |align="left"|256, 384 |- |}

Generation with PuTTYgen

Generated keys can be copied directly from e.g. PuTTYgen,

and inserted into the Configuration - Console input field. Public keys are accepted in SSH2 or OpenSSH format.

Generation with ssh-keygen

The tool ssh-keygen is mostly shipped with Linux and Windows to generate SSH keys.
Here is an example to generate an ECDSA 384 key.

ssh-keygen -t ecdsa -b 384 -f ssh.key

In the file ssh.pub is then the private key, the content of ssh.key.pub is inserted into the field "Upload SSH public key:".

All commands

logout	go to login prompt when enabled
quit	quits telnet session - nothing in serial console
back	back one cmd level
help	show all cmds from this level
help all	show all cmds
clock	enters cmd group "clock"
clock ntp enabled set {OFF=0\|ON=1}	enables ntp
clock ntp enabled show	shows if ntp enabled
clock timezone set {minutes}	sets timezone
clock timezone show	shows timezone
clock dst enabled set {OFF=0\|ON=1}	enables dst
clock dst enabled show	shows if dst is enabled
clock manual set "{hh:mm:ss yyyy-mm-dd}"	sets time and date manually
clock show	shows actual time and date
clock ntp server {PRIMARY=0\|BACKUP=1} set "{dns_name}"	sets ntp server name
clock ntp server {PRIMARY=0\|BACKUP=1} show	shows ntp server name
console	enters cmd group "console"
console version	shows unique console version number
console telnet enabled set {OFF=0\|ON=1}	enables telnet on/off
console telnet enabled show	shows if telnet enabled
console telnet port set {ip_port}	sets telnet port
console telnet port show	shows telnet port
console telnet raw set {OFF=0\|ON=1}	sets raw mode (disables editing) on/off
console telnet raw show	shows if raw mode enabled
console telnet echo set {OFF=0\|ON=1}	enables echo on/off
console telnet echo show	shows if echo enabled
console telnet activeneg set {OFF=0\|ON=1}	enables telnet active negotiation (IAC) on/off
console telnet activeneg show	shows if active negotiation enabled
console telnet login set {OFF=0\|ON=1}	enables login on/off
console telnet login show	shows if login enabled
console telnet login local set {OFF=0\|ON=1}	enables local login on/off
console telnet login local show	shows if local login enabled
console telnet login radius set {OFF=0\|ON=1}	enables login for RADIUS on/off
console telnet login radius show	shows if RADIUS login enabled
console telnet login delay set {OFF=0\|ON=1}	enables delay (after 3 login fails) on/off
console telnet login delay show	shows if login delay enabled
console telnet pushmsgs config set {OFF=0\|ON=1}	enables persistent push msgs
console telnet pushmsgs config show	shows if persistent push msgs are enabled
console telnet pushmsgs set {OFF=0\|ON=1}	enables temporary push msgs
console telnet pushmsgs show	shows if temporary push msgs are enabled
console telnet user set "{username}"	sets login user name
console telnet user show	shows login user name
console telnet passwd set "{passwd}"	sets login password
console telnet passwd hash set "{passwd}"	sets login hashed password
console ssh enabled set {OFF=0\|ON=1}	enables SSH
console ssh enabled show	shows if SSH enabled
console ssh port set {ip_port}	sets SSH port
console ssh port show	shows SSH port
console ssh echo set {OFF=0\|ON=1}	enables echo on/off
console ssh echo show	shows if echo enabled
console ssh pushmsgs config set {OFF=0\|ON=1}	enables persistent push msgs
console ssh pushmsgs config show	shows if persistent push msgs are enabled
console ssh pushmsgs set {OFF=0\|ON=1}	enables temporary push msgs
console ssh pushmsgs show	shows if temporary push msgs are enabled
console ssh public hash set "{passwd}"	sets hash of SSH public key
console ssh public hash show	shows hash of SSH public key
console serial enabled set {OFF=0\|ON=1}	enables serial console on/off
console serial enabled show	shows if serial console enabled
console serial raw set {OFF=0\|ON=1}	sets raw mode (disables editing) on/off
console serial raw show	shows if raw mode enabled
console serial echo set {OFF=0\|ON=1}	enables echo on/off
console serial echo show	shows if echo enabled
console serial kvm set {OFF=0\|ON=1}	enables binary KVM cmds on serial port on/off
console serial kvm show	shows if binary KVM cmds enabled
console serial utf8 set {OFF=0\|ON=1}	enables UTF8 support
console serial utf8 show	shows if UTF8 enabled
console serial login set {OFF=0\|ON=1}	enables login on/off
console serial login show	shows if login enabled
console serial login local set {OFF=0\|ON=1}	enables local login on/off
console serial login local show	shows if local login enabled
console serial login radius set {OFF=0\|ON=1}	enables login for RADIUS on/off
console serial login radius show	shows if RADIUS login enabled
console serial login delay set {OFF=0\|ON=1}	enables delay (after 3 login fails) on/off
console serial login delay show	shows if login delay enabled
console serial pushmsgs config set {OFF=0\|ON=1}	enables persistent push msgs
console serial pushmsgs config show	shows if persistent push msgs are enabled
console serial pushmsgs set {OFF=0\|ON=1}	enables temporary push msgs
console serial pushmsgs show	shows if temporary push msgs are enabled
console serial user set "{username}"	sets login user name
console serial user show	shows login user name
console serial passwd set "{passwd}"	sets login password

console serial passwd hash set "{passwd}"	sets login hashed password
email	enters cmd group "email"
email enabled set {OFF=0\|ON=1}	enables email on/off
email enabled show	shows if email is enabled
email sender set "{email_addr}"	sets email sender address
email sender show	shows email sender address
email recipient set "{email_addr}"	sets email recipient address
email recipient show	shows email recipient address
email server set "{dns_name}"	sets email SMTP server address
email server show	shows email SMTP server address
email port set {ip_port}	sets email SMTP port
email port show	shows email SMTP port
email security set {NONE=0\|STARTTLS=1\|SSL=2}	sets SMTP connection security
email security show	shows SMTP connection security
email auth set {NONE=0\|PLAIN=1\|LOGIN=2}	sets email authentication
email auth show	show email authentication
email user set "{username}"	sets SMTP username
email user show	shows SMTP username
email passwd set "{passwd}"	sets SMTP password
email passwd hash set "{passwd}"	sets crypted SMTP password
email testmail	send test email
ethernet	enters cmd group "ethernet"
ethernet mac show	shows MAC address
ethernet link show	shows ethernet link state
ethernet phyprefer set {10MBIT_HD=0\|10MBIT_FD=1\|100MBIT_HD=2\|100MBIT_FD=3}	sets preferred speed for PHY Auto Negotiation
ethernet phyprefer show	shows preferred speed for PHY Auto Negotiation
extinput	enters cmd group "extinput"
extinput {port_num} {inp_num} state show	shows input state
extinput all state {MODE0=0\|MODE1=1\|MODE2=2} show	shows input state of all ports in 3 different view modes
extinput {port_num} {inp_num} name set "{name}"	sets sensor name to label
extinput {port_num} {inp_num} name show	shows label of sensor
extinput {port_num} {inp_num} invert enabled set {OFF=0\|ON=1}	inverts input on/off
extinput {port_num} {inp_num} invert enabled show	shows if input inverted
extinput {port_num} {inp_num} label {LOW=0\|HIGH=1} set "{name}"	sets input low/high text
extinput {port_num} {inp_num} label {LOW=0\|HIGH=1} show	shows input low/high text
extinput {port_num} {inp_num} events set {OFF=0\|ON=1}	enables input events on/off
extinput {port_num} {inp_num} events show	shows if input events are enabled
extinput {port_num} {inp_num} events type set "{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2 ,EVT_BEEPER=5,EVT_DISPLAY=6,EVT_CONS OLE=7,EVT_MQTT=8}"	enables different event types
extinput {port_num} {inp_num} events type show	shows what event types are enabled
extinput {port_num} {inp_num} publish mode set {NONE=0\|INTERVAL=1\|DELTA=2\| INTERV_DELTA=3}	sets publish mode
extinput {port_num} {inp_num} publish mode show	showshows publish mode
extinput {port_num} {inp_num} publish mqtt retain set {OFF=0\|ON=1}	sets mqtt retain
extinput {port_num} {inp_num} publish mqtt retain show	shows if mqtt retain set
extinput {port_num} {inp_num} publish timer set {num_secs}	sets publish time interval
extinput {port_num} {inp_num} publish timer show	shows publish time interval
extinput {port_num} {inp_num} {LOW=0\|HIGH=1} port set {port_num}	sets Port for Power Port Switching actions
extinput {port_num} {inp_num} {LOW=0\|HIGH=1} port show	shows Port for Power Port Switching actions
extinput {port_num} {inp_num} {LOW=0\|HIGH=1 state set {OFF=0\|ON=1\|DISABLED=2}	sets Port state for Power Port Switching actions
extinput {port_num} {inp_num} {LOW=0\|HIGH=1} state show	shows Port state for Power Port Switching actions
extsensor	enters cmd group "extsensor"
extsensor all show	shows all values from connected external sensors
extsensor all show	shows all plugged sensors and fields
extsensor {port_num} {sen_field} value show	shows sensor value
extsensor {port_num} {sen_type} label set "{name}"	sets sensor name to label
extsensor {port_num} {sen_type} label show	shows label of sensor
extsensor {port_num} type show	shows type of sensor
extsensor {port_num} {sen_type} {sen_field} events set {off=0\|on=1}	enables sensor events on/off
extsensor {port_num} {sen_type} {sen_field} events show	shows if sensor events are enabled
extsensor {port_num} {sen_type} {sen_field} events type set "{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2 ,EVT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER =5,EVT_DISPLAY=6,EVT_CONSOLE=7,EVT_M QTT=8}"	enables different event types
extsensor {port_num} {sen_type} {sen_field} events type show	shows what event types are enabled
extsensor {port_num} {sen_type} {sen_field} events beeper mode set {CONTINOUS=0\| INTERMITTENT=1}	sets beeper tone
extsensor {port_num} {sen_type} {sen_field} events beeper mode show	shows beeper tone
extsensor {port_num} {sen_type} {sen_field} maxval set {num}	sets maximum value for sensor
extsensor {port_num} {sen_type} {sen_field} maxval show	shows maximum value for sensor
extsensor {port_num} {sen_type} {sen_field} minval set {num}	sets minimum value for sensor
extsensor {port_num} {sen_type} {sen_field} minval show	shows minimum value for sensor
extsensor {port_num} {sen_type} {sen_field} hyst set {num}	sets hysterese value for sensor
extsensor {port_num} {sen_type} {sen_field} hyst show	shows hysterese value for sensor
extsensor {port_num} {sen_type} {sen_field} publish mode set {NONE=0\|INTERVAL=1\| DELTA=2\|INTERV_DELTA=3}	sets publish mode
extsensor {port_num} {sen_type} {sen_field} publish mode show	shows publish mode
extsensor {port_num} {sen_type} {sen_field} publish mqtt retain set {OFF=0\|ON=1}	sets mqtt retain
extsensor {port_num} {sen_type} {sen_field} publish mqtt retain show	shows if mqtt retain set
extsensor {port_num} {sen_type} {sen_field} publish timer set {num_secs}	sets publish time interval
extsensor {port_num} {sen_type} {sen_field} publish timer show	shows publish time interval

extsensor {port_num} {sen_type} {sen_field} publish delta set {float}	sets publish delta value
extsensor {port_num} {sen_type} {sen_field} publish delta show	shows publish delta value
extsensor {port_num} {sen_type} {sen_field} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} port set {port_num}	sets Port for Power Port Switching actions
extsensor {port_num} {sen_type} {sen_field} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} port show	shows Port for Power Port Switching actions
extsensor {port_num} {sen_type} {sen_field} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} state set {OFF=0\|ON=1\| DISABLED=2}	sets Port state for Power Port Switching actions
extsensor {port_num} {sen_type} {sen_field} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} state show	shows Port state for Power Port Switching actions
extsensor period set {24H=0\|12H=1\|2H=2\|1H=3\|30MIN=4}	sets sensor Min/Max measurement period
extsensor period show	shows sensor Min/Max measurement period
extsensor beeper set {OFF=0\|ON=1}	enables beeper sensor alarms
extsensor beeper show	shows if beeper sensor alarms are enabled
extsensor {port_num} {sen_field} calib set {float}	sets calibration offset for temperature or humidity
extsensor {port_num} {sen_field} calib show	shows calibration offset for temperature or humidity
http	enters cmd group "http"
http server set {HTTP_BOTH=0\|HTTPS_ONLY=1\|HTTP_ONLY=22\|HTTPS_REDIR=3}	sets accepted connection types
http server show	shows accepted connection types
http port set {ip_port}	sets http port
http port show	shows http port
http portssl set {ip_port}	sets https port
http portssl show	shows https port
http tls mode set {TLS12=0\|TLS13_12=1\|TLS13=2\|TLS13_12_11=3}	restricts TLS mode
http tls mode show	shows TLS mode restriction
http auth mode set {BASIC=0\|SESSION=1\|SESSION_EXT=2}	sets http session authentication mode
http auth mode show	shows http session authentication mode and compatibility
http passwd enabled set {OFF=0\|ON=1}	enables http password on/off
http timeout admin set {num_secs}	sets admin session timeout
http timeout admin show	shows admin session timeout
http timeout user set {num_secs}	sets user session timeout
http timeout user show	shows user session timeout
http passwd enabled show	shows if http password enabled
http passwd local set {OFF=0\|ON=1}	enables local login on/off
http passwd local show	shows if local login enabled
http passwd radius set {OFF=0\|ON=1}	enables login for RADIUS on/off
http passwd radius show	shows if RADIUS login enabled
http passwd user set "{passwd}"	sets http user password
http passwd admin set "{passwd}"	sets http admin password
http passwd hash user set "{passwd}"	sets hashed http user password http passwd hash admin set "{passwd}" sets hashed http admin password
ip4	enters cmd group "ip4"
ip4 hostname set "{name}"	sets device hostname
ip4 hostname show	shows device hostname
ip4 address set "{ip_address}"	sets IPv4 address
ip4 address show	shows IPv4 address
ip4 netmask set "{ip_address}"	sets IPv4 netmask
ip4 netmask show	shows IPv4 netmask
ip4 gateway set "{ip_address}"	sets IPv4 gateway address
ip4 gateway show	shows IPv4 gateway address
ip4 dns set "{ip_address}"	sets IPv4 DNS server address
ip4 dns show	shows IPv4 DNS server address
ip4 dhcp enabled set {OFF=0\|ON=1}	enables IPv4 DHCP on/off
ip4 dhcp enabled show	shows IPv4 DHCP state
ip6	enters cmd group "ip6"
ip6 enabled set {OFF=0\|ON=1}	enables IPv6 on/off
ip6 enabled show	shows if IPv6 is enabled
ip6 routadv enabled set {OFF=0\|ON=1}	enables IPv6 router advertisement
ip6 routadv enabled show	shows IPv6 router advertisement state
ip6 dhcp enabled set {OFF=0\|ON=1}	enables IPv6 DHCP on/off
ip6 dhcp enabled show	shows if IPv6 DHCP is enabled
ip6 address show	show all IPv6 addresses
ip6 gateway show	show all IPv6 gateways
ip6 dns show	show all IPv6 DNS server
ip6 manual enabled set {OFF=0\|ON=1}	enables manual IPv6 addresses
ip6 manual enabled show	shows if manual IPv6 addresses are enabled
ip6 manual address {1..4} set "{ip_address}"	sets manual IPv6 address
ip6 manual address {1..4} show	shows manual IPv6 address
ip6 manual gateway set "{ip_address}"	sets manual IPv6 gateway address
ip6 manual gateway show	shows manual IPv6 gateway address
ip6 manual dns {1..2} set "{ip_address}"	sets manual IPv6 DNS server address
ip6 manual dns {1..2} show	shows manual IPv6 DNS server address
ipacl	enters cmd group "ipacl"
ipacl ping enabled set {OFF=0\|ON=1}	enables ICMP ping on/off
ipacl ping enabled show	shows if ICMP ping enabled
ipacl enabled set {OFF=0\|ON=1}	enable IP filter on/off
ipacl enabled show	shows if IP filter enabled
ipacl filter {ipacl_num} set "{dns_name}"	sets IP filter {ipacl_num}
ipacl filter {ipacl_num} show	shows IP filter {ipacl_num}
linesensor	enters cmd group "linesensor"
linesensor all {field_list} show	shows energy sensors according field list of all line sensors
linesensor {line_num} {field_list} show	shows energy sensors according field list of one line sensor
linesensor {line_num} {energy_sensor} value show	shows energy sensor of given line
linesensor {line_num} ovp show	show state of Overvoltage Protection
linesensor {line_num} counter reset	resets energy metering counter
linesensor {line_num} label set "{name}"	sets line meter to label
linesensor {line_num} label show	shows label of line meter
linesensor {line_num} {energy_sensor} events set {OFF=0\|ON=1}	enables events on/off
linesensor {line_num} {energy_sensor} events show	shows if events are enabled
linesensor {line_num} {energy_sensor} events type set "{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2,EVT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER =5}"	enables different event types
linesensor {line_num} {energy_sensor} events type show	shows what event types are enabled
linesensor {line_num} {energy_sensor} events beeper mode set {CONTINOUS=0\| INTERMITTENT=1}	sets beeper tone
linesensor {line_num} {energy_sensor} events beeper mode show	shows beeper tone
linesensor {line_num} {energy_sensor} maxval set {float}	sets maximum value for line meter
linesensor {line_num} {energy_sensor} maxval show	shows maximum value for line meter
linesensor {line_num} {energy_sensor} minval set {float}	sets minimum value for line meter
linesensor {line_num} {energy_sensor} minval show	shows minimum value for line meter
linesensor {line_num} {energy_sensor} hyst set {float}	sets hysterese value for line meter
linesensor {line_num} {energy_sensor} hyst show	shows hysterese value for line meter
linesensor {line_num} {energy_sensor} publish mode set {NONE=0\|INTERVAL=1\|DELTA=2\| INTERV_DELTA=3}	sets publish mode
linesensor {line_num} {energy_sensor} publish mode show	shows publish mode
linesensor {line_num} {energy_sensor} publish mqtt retain set {OFF=0\|ON=1}	sets mqtt retain
linesensor {line_num} {energy_sensor} publish mqtt retain show	shows if mqtt retain set
linesensor {line_num} {energy_sensor} publish timer set {num_secs}	sets publish time interval
linesensor {line_num} {energy_sensor} publish timer show	shows publish time interval
linesensor {line_num} {energy_sensor} publish delta set {float}	sets publish delta value
linesensor {line_num} {energy_sensor} publish delta show	shows publish delta value
linesensor {line_num} {energy_sensor} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} port set {port_num}	sets Port for Power Port Switching actions
linesensor {line_num} {energy_sensor} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} port show	shows Port for Power Port Switching actions
linesensor {line_num} {energy_sensor} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} state set {OFF=0\|ON=1\| DISABLED=2}	sets Port state for Power Port Switching actions
linesensor {line_num} {energy_sensor} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\| BELOWMAX=3} state show	shows Port state for Power Port Switching actions
linesensor {line_num} events set {OFF=0\|ON=1}	LEGACY - enables events on/off
linesensor {line_num} events show	LEGACY - shows if events are enabled
linesensor {line_num} events type set "{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2 ,EVT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER=5,EVT_DISPLAY=6,EVT_CONSOLE=7,EVT_M QTT=8}"	LEGACY - enables different event types
linesensor {line_num} events type show	LEGACY - shows what event types are enabled
linesensor {line_num} maxval set {float}	LEGACY - sets maximum value for line meter
linesensor {line_num} maxval show	LEGACY - shows maximum value for line meter
linesensor {line_num} minval set {float}	LEGACY - sets minimum value for line meter
linesensor {line_num} minval show	LEGACY - shows minimum value for line meter
linesensor {line_num} hyst set {float}	LEGACY - sets hysterese value for line meter
linesensor {line_num} hyst show	LEGACY - shows hysterese value for line meter
linesensor {line_num} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} port set {port_num}	LEGACY - sets Port for Power Port Switching actions
linesensor {line_num} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} port show	LEGACY - shows Port for Power Port Switching actions
linesensor {line_num} {BELOWMIN=0\|ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} state set {OFF=0\|ON=1\|DISABLED=2}	LEGACY - sets Port state for Power Port Switching actions
linesensor {line_num} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} state show	LEGACY - shows Port state for Power Port Switching actions
linesensor beeper set {OFF=0\|ON=1}	enables beeper for line meter alarms
linesensor beeper show	shows if beeper for line meter alarms is enabled
modbus	enters cmd group "modbus"
modbus enabled set <off=0/on=1>	enables Modbus TCP support
modbus enabled show	shows if Modbus is enabled
modbus port set <ip_port>	sets Modbus TCP port
modbus port show	shows Modbus TCP port
mqtt	enters cmd group "mqtt"
mqtt {broker_idx} enabled set {OFF=0\|ON=1}	enable mqtt
mqtt {broker_idx} enabled show	shows if mqtt enabled
mqtt {broker_idx} server set "{dns_name}"	sets broker name
mqtt {broker_idx} server show	shows broker name
mqtt {broker_idx} tls enabled set {OFF=0\|ON=1}	enable TLS
mqtt {broker_idx} tls enabled show	shows if TLS enabled
mqtt {broker_idx} port set {ip_port}	set broker TCP/IP port
mqtt {broker_idx} port show	shows broker TCP/IP port
mqtt {broker_idx} user set "{username}"	sets username
mqtt {broker_idx} user show	shows username
mqtt {broker_idx} passwd set "{passwd}"	sets password
mqtt {broker_idx} passwd hash set "{passwd}"	sets hashed passwd
mqtt {broker_idx} client set "{name}"	sets client name
mqtt {broker_idx} client show	shows client name
mqtt {broker_idx} qos set {QOS0=0\|QOS1=1}	sets QoS level
mqtt {broker_idx} qos show	shows QoS level
mqtt {broker_idx} keepalive set {num_secs}	sets keep-alive time
mqtt {broker_idx} keepalive show	shows keep-alive time
mqtt {broker_idx} topic set "{name}"	sets topic prefix
mqtt {broker_idx} topic show	shwos topic prefix
mqtt {broker_idx} console enabled set {OFF=0\| ON=1}	permit console cmds
mqtt {broker_idx} console enabled show	shows if console cmds allowed
mqtt {broker_idx} device data timer set {num_secs}	sets telemetry interval
mqtt {broker_idx} device data timer show	shows telemetry interval
port	enters cmd group "port"
port {port_num} state set {OFF=0\|ON=1}	sets port to new state
port {port_num} state show	shows port state
port all state set "{port_list}" {OFF=0\|ON=1}	sets several ports in one cmd - e.g. port all state set "1,3,5" 1
port all state {MODE0=0\|MODE1=1\|MODE2=2} show	shows all port states in 3 different view modes
port all set {OFF=0\|ON=1\|OFF_REV=2\|ON_REV=3}	switch all ports on/off forward or reverse
port restart all set {REINIT=0\| OFF_REV_REINIT=1,OFF_REINIT=2}	reinit coldstart sequence (optional first all off)
port {port_num} reset	start reset sequence for port
port {port_num} toggle	toggles port
port {port_num} batch set {OFF=0\|ON=1} wait {num_secs} {OFF=0\|ON=1}	starts batch mode for port
port {port_num} batch cancel	cancels batch mode
port {port_num} label set "{name}"	sets port label name
port {port_num} label show	shows port label name
port {port_num} initstate coldstart set {OFF=0\| ON=1\|REMEMBER=2}	sets port coldstart initialization
port {port_num} initstate coldstart show	shows port coldstart initialization
port {port_num} initstate delay set {num}	sets port init delay
port {port_num} initstate delay show	shows port init delay
port {port_num} repowerdelay set {num}	sets port repower delay
port {port_num} repowerdelay show	shows port repower delay
port {port_num} resettime set {num}	sets port reset duration
port {port_num} resettime show	shows port reset duration
port {port_num} watchdog enabled set {OFF=0\| ON=1}	sets port watchdog to on/off
port {port_num} watchdog enabled show	shows port watchdog state
port {port_num} watchdog mode set {OFF=0\| PORT_RESET=1\|IP_MS=2\|IP_MS_INV=3}	sets port watchdog mode
port {port_num} watchdog mode show	shows port watchdog mode
port {port_num} watchdog type set {WD_ICMP=0\| WD_TCP=1}	sets port watchdog type
port {port_num} watchdog type show	shows port watchdog type
port {port_num} watchdog link down set {OFF=0\| ON=1}	sets if watchdog active when eth link down
port {port_num} watchdog link down show	shows if watchdog active when eth link down
port {port_num} watchdog host set "{dns_name}"	sets port watchdog host target
port {port_num} watchdog host show	shows port watchdog host target
port {port_num} watchdog port set {ip_port}	sets port watchdog TCP port
port {port_num} watchdog port show	shows port watchdog TCP port
port {port_num} watchdog pinginterval set {num}	sets port watchdog ping interval
port {port_num} watchdog pinginterval show	shows port watchdog ping interval
port {port_num} watchdog pingretries set {num}	sets port watchdog ping retries
port {port_num} watchdog pingretries show	shows port watchdog ping retries
port {port_num} watchdog retrybooting set {OFF=0\|ON=1}	sets port watchdog retry booting to on/off
port {port_num} watchdog retrybooting show	shows port watchdog retry booting state
port {port_num} watchdog bootretries set {num}	sets port watchdog retry boot timeout
port {port_num} watchdog bootretries show	hows port watchdog retry boot timeout
radius	enters cmd group "radius"
radius {PRIMARY=0\|SECONDARY=1} enabled set <off=0/on=1>	enables radius client
radius {PRIMARY=0\|SECONDARY=1} enabled show	show if radius client enabled
radius {PRIMARY=0\|SECONDARY=1} server set "<dns_name>"	sets radius server address
radius {PRIMARY=0\|SECONDARY=1} server show	shows radius server address
radius {PRIMARY=0\|SECONDARY=1} password set "{passwd}"	sets radius server shared secret
radius {PRIMARY=0\|SECONDARY=1} password hash set "{passwd}"	sets radius server crypted shared secret
radius {PRIMARY=0\|SECONDARY=1} auth timeout set {num_secs}	sets server request timeout
radius {PRIMARY=0\|SECONDARY=1} auth timeout show	shows server request timeout
radius {PRIMARY=0\|SECONDARY=1} retries set {0..99}	sets server number of retries
radius {PRIMARY=0\|SECONDARY=1} retries show	shows server number of retries
radius chap enabled set <off=0/on=1>	enables CHAP
radius chap enabled show	shows if CHAP is enabled
radius message auth set <off=0/on=1>	enables request message authentication
radius message auth show	shows if request message authentication is enabled
radius default timeout set {num_secs}	sets default session timeout (when not returned as Session-Timout Attribute)
radius default timeout show	shows default session timeout
rcmb	enters cmd group "rcmb"
rcmb {mod_num} state show	show rcmb module state
rcmb {mod_num} {RMS=0\|DC=1} value show	shows RMS/DC RC values
rcmb {mod_num} {RMS=0\|DC=1} output show	shows module RMS/DC outputs
rcmb {mod_num} {RMS=0\|DC=1} events set {OFF=0\|ON=1}	enables sensor events on/off
rcmb {mod_num} {RMS=0\|DC=1} events show	shows if sensor events are enabled
rcmb {mod_num} {RMS=0\|DC=1} events type set "{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2,EVT_BEEPER=5,EVT_DISPLAY=6,EVT_CONS OLE=7,EVT_MQTT=8}"	enables different event types
rcmb {mod_num} {RMS=0\|DC=1} events type show	shows what event types are enabled
rcmb {mod_num} {RMS=0\|DC=1} events beeper mode set {CONTINOUS=0\|INTERMITTENT=1}	sets beeper tone
rcmb {mod_num} {RMS=0\|DC=1} events beeper mode show	shows beeper tone
rcmb {mod_num} {RMS=0\|DC=1} maxval set {float}	sets maximum value for sensor
rcmb {mod_num} {RMS=0\|DC=1} maxval show	shows maximum value for sensor
rcmb {mod_num} {RMS=0\|DC=1} minval set {float}	sets minimum value for sensor
rcmb {mod_num} {RMS=0\|DC=1} minval show	shows minimum value for sensor
rcmb {mod_num} {RMS=0\|DC=1} hyst set {float}	sets hysterese value for sensor
rcmb {mod_num} {RMS=0\|DC=1} hyst show	shows hysterese value for sensor
rcmb {mod_num} {RMS=0\|DC=1} publish mode set {NONE=0\|INTERVAL=1\|DELTA=2\| INTERV_DELTA=3}	sets publish mode
rcmb {mod_num} {RMS=0\|DC=1} publish mode show	shows publish mode
rcmb {mod_num} {RMS=0\|DC=1} publish mqtt retain set {OFF=0\|ON=1}	sets mqtt retain
rcmb {mod_num} {RMS=0\|DC=1} publish mqtt retain show	shows if mqtt retain set
rcmb {mod_num} {RMS=0\|DC=1} publish timer set {num_secs}	sets publish time interval
rcmb {mod_num} {RMS=0\|DC=1} publish timer show	shows publish time interval
rcmb {mod_num} {RMS=0\|DC=1} publish delta set {float}	sets publish delta value
rcmb {mod_num} {RMS=0\|DC=1} publish delta show	shows publish delta value
rcmb {mod_num} {RMS=0\|DC=1} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} port set {port_num}	sets power port for sensor values action
rcmb {mod_num} {RMS=0\|DC=1} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} port show	shows power port for sensor values action
rcmb {mod_num} {RMS=0\|DC=1} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} state set {OFF=0\|ON=1\|DISABLED=2}	sets state for sensor values action
rcmb {mod_num} {RMS=0\|DC=1} {BELOWMIN=0\| ABOVEMIN=1\|ABOVEMAX=2\|BELOWMAX=3} state show	shows state for sensor values action
snmp	enters cmd group "snmp"
snmp port set {ip_port}	sets SNMP UDP port
snmp port show	shows SNMP UDP port
snmp snmpget enabled set {OFF=0\|ON=1}	enables SNMP GET cmds on/off
snmp snmpget enabled show	show if SNMP GET cmds are enabled
snmp snmpset enabled set {OFF=0\|ON=1}	enables SNMP SET cmds on/off
snmp snmpset enabled show	show if SNMP SET cmds are enabled
snmp snmpv2 enabled set {OFF=0\|ON=1}	enables SNMP v2 on/off
snmp snmpv2 enabled show	show if SNMP v2 is enabled
snmp snmpv2 public set "{text}"	enables SNMP v3 on/off
snmp snmpv2 public show	show if SNMP v3 isenabled
snmp snmpv2 private set "{text}"	sets SNMP v2 public cummnity
snmp snmpv2 private show	shows SNMP v2 public community
snmp system {CONTACT=0\|NAME=1\| LOCATION=2} set "{text}"	sets sysLocation/sysName/sysContact
snmp system {CONTACT=0\|NAME=1\|LOCATION=2} show	gets sysLocation/sysName/sysContact
snmp snmpv3 enabled set {OFF=0\|ON=1}	sets SNMP v2 private community
snmp snmpv3 enabled show	shows SNMP v2 private community
snmp snmpv3 username set "{text}"	sets SNMP v3 username
snmp snmpv3 username show	shows SNMP v3 username
snmp snmpv3 authalg set {NONE=0\|MD5=1\| SHA1=2\|SHA256=3\|SHA384=4\|SHA512=5}	sets SNMP v3 authentication
snmp snmpv3 authalg show	show SNMP v3 authentication algorithm
snmp snmpv3 privalg set {NONE=0\|DES=1\| 3DES=2\|AES128=3\|AES192=4\|AES256=5\| AES192=6\|AES256=7}	sets SNMP v3 privacy algorithm
snmp snmpv3 privalg show	show SNMP v3 privacy algorithm
snmp snmpv3 authpasswd set "{passwd}"	sets SNMP v3 authentication password
snmp snmpv3 privpasswd set "{passwd}"	sets SNMP v3 privacy password
snmp snmpv3 authpasswd hash set "{passwd}"	sets SNMP v3 authentication hashed password
snmp snmpv3 privpasswd hash set "{passwd}"	sets SNMP v3 privacy hashed password
snmp trap type set {NONE=0\|V1=1\|V2=2\|V3=3}	sets type of SNMP traps
snmp trap type show	show SNMP trap type
snmp trap receiver {trap_num} set "{dns_name}"	sets address and port of SNMP trap receiver {trap_num}
snmp trap receiver {trap_num} show	show address and port of SNMP trap receiver {trap_num}
syslog	enters cmd group "syslog"
syslog enabled set {OFF=0\|ON=1}	enables syslog msgs on/off
syslog enabled show	show if syslog enabled
syslog server set "{dns_name}"	sets address of syslog server
syslog server show	shows address of syslog server
system	enters cmd group "system"
system beeper manual set {OFF=0\|ON=1} {millisec}	manually sets beeper with optional duration
system beeper manual show	shows beeper state
system restart	restarts device
system fabsettings	restore fab settings and restart device
system bootloader	enters bootloader mode
system flushdns	flush DNS cache
system uptime	number of seconds the device is running
system name show	shows device name
system version show	shows actual firmware version
system display {disp_num} default extsensor {port_num} {sen_type} set {sen_field}	shows external sensor
system display {disp_num} default linesensor {line_num} set {sen_field}	shows energy line sensor
system display {disp_num} default set {BLANK=0,LOCAL_TIME=1,UTC_TIME=2}	shows other contents
system display {disp_num} default show	shows default setting for display
system display default hash set "{data}"	sets hashed display setting
system display default hash show	shows hashed display setting
system sensor {VSYS=0\|VAUX=1\|VMAIN=2\| TCPU=3} show	shows internal sensors if model supports it
system {SWITCH_PORT=0} events set {OFF=0\| ON=1}	enable global events
system {SWITCH_PORT=0} events show	shows if global events enabled
system {SWITCH_PORT=0} events type set "{EVT_SYSLOG=0,EVT_SNMP=1,EVT_EMAIL=2,EVT_SMS=3,EVT_GSMEMAIL=4,EVT_BEEPER =5,EVT_DISPLAY=6,EVT_CONSOLE=7,EVT_MQTT=8}"	enables different event types
system {SWITCH_PORT=0} events type show	shows what event types are enabled
system {SWITCH_PORT=0} events mqtt retain set {OFF=0\|ON=1}	sets mqtt retain
system {SWITCH_PORT=0} events mqtt retain show	shows if mqtt retain set
system panel enabled set {OFF=0\|ON=1}	blocks panel buttons when not enabled
system panel enabled show	shows if panel buttons are enabled
system panel port all set {OFF=0\|ON=1}	enable siwtch all relays from panel buttons
system panel port all show	shows if siwtch all relays from panel buttons enabled
timer	enters cmd group "timer"
timer enabled set {OFF=0\|ON=1}	enables timer functions
timer enabled show	shows if timer a enabled
timer syslog facility set {0..23}	sets facility level for timer syslog
timer syslog facility show	shows facility level for timer syslog
timer syslog verbose set {0..7}	sets verbose level for timer syslog
timer syslog verbose show	shows verbose level for timer syslog
timer {rule_num} enabled set {OFF=0\|ON=1}	enables rule
timer {rule_num} enabled show	shows if rule is enabled
timer {rule_num} name set "{name}"	sets name of rule
timer {rule_num} name show	shows name of rule
timer {rule_num} {FROM=0\|UNTIL=1} set "{yyyymm-dd}"	sets date range of rule
timer {rule_num} {FROM=0\|UNTIL=1} show	shows date range of rule
timer {rule_num} trigger jitter set {0..65535}	sets jitter for rule
timer {rule_num} trigger jitter show	show jitter of rule
timer {rule_num} trigger random set {0..100}	sets probability for rule
timer {rule_num} trigger random show	shows rule probability
timer {rule_num} trigger {HOUR=0\|MIN=1\|SEC=2\| DAY=3\|MON=4\|DOW=5} set "{time_date_list}"	sets time date list
timer {rule_num} trigger {HOUR=0\|MIN=1\|SEC=2\| DAY=3\|MON=4\|DOW=5} show	shows time date list
timer {rule_num} action mode set {SWITCH=1\| CLI=2}	sets switch or cli cmd
timer {rule_num} action mode show	shows if switch or cli cmd
timer {rule_num} action {SWITCH1=0\| SWITCH2=1} {OFF=0\|ON=1} set "{port_list}"	sets port list for switch cmd
timer {rule_num} action {SWITCH1=0\| SWITCH2=1} {OFF=0\|ON=1} show	shows port list for switch cmd
timer {rule_num} action delay set {0..65535}	delay between cmds
timer {rule_num} action delay show	shows delay between cmds
timer {rule_num} action console set "{cmd}"	sets cmd string
timer {rule_num} action console show	shows cmd string
timer {rule_num} action hash set "{data}"	sets action binary form
timer {rule_num} action hash show	shows action binary form
timer {rule_num} delete	delete one timer
timer delete all	delete all timer
vt100	enters cmd group "vt100"
vt100 echo set {OFF=0\|ON=1}	sets console echo state
vt100 echo show	shows console echo state
vt100 numeric set {OFF=0\|ON=1}	sets numeric mode
vt100 numeric show	shows numeric mode state
vt100 reset	resets terminal

Console

Inhaltsverzeichnis