Quelltext der Seite MQTT eng

<br /> [[Datei:MQTT.png]]
<br /><u>Enable MQTT:</u>Enables MQTT support.
<br /><u>Broker:</u>DNS or IP address of the MQTT broker.
<br /><u>TLS:</u>Turns on TLS encryption.
<br /><u>Mode TCP port:</u>The TCP/IP port number of the broker.
<br /><u>Username:</u>The MQTT username.
<br /><u>password:</u>The password for the username.
<br /><u>Client ID:</u>The MQTT client ID.
<br />
<br /> [[Datei:Wichtig_zeichen.png]] The client IDs of a user must be different! If two clients of a user have the same name, the connection of one client is normally terminated.
<br />
<br /><u>Quality of Service (QoS):</u>Sets the QoS value (0 or 1) of the MQTT publishes.
<br /><u>Keep-alive ping interval:</u>This defines the time interval in which the client sends an MQTT ping.
<br /><u>Topic prefix:</u>Defines the beginning of the topic with which all messages are sent. The strings '''[mac]''' and '''[host]''' symbolize the MAC address or the hostname of the device. Permit CLI commands: Enables the execution of console commands.
<br /><u>Publish device data summary interval:</u>Time interval in which messages with the global status of the device are sent.
<br /> [[Datei:MQTT_Logs-Status.png]]
<br /><u>MQTT Logs:</u>Outputs individual log messages about the connection setup.
<br /><u>MQTT Broker Status:</u>Time information about connection duration, the last publish and the last keep-alive.